(1) The helical blades of the screw conveyor have three types: solid helical type, belt helical type and blade helical type. The solid helical surface is called the s method, and the helical pitch of the GX type is 0.8 times the diameter of the blade. The LS type screw conveyor is suitable for conveying powdery and granular materials. The belt helical surface is also known as the D method. The blade type helical surface is rarely used, and is mainly used to convey materials with high viscosity and compressibility. During the conveying process, processes such as stirring and mixing are completed at the same time, and the spiral pitch is about 1.2 times the diameter of the spiral blade.
(2) The screw blades of the screw conveyor have two rotation directions: left-handed and right-handed.
(3) The types of screw conveyors include horizontal fixed screw conveyors and vertical screw conveyors. Horizontal fixed screw conveyor is the most commonly used type. The vertical screw conveyor is used to lift materials in a short distance. The conveying height is generally not more than 8m. The screw blade is a solid surface type. It must have a horizontal screw feeding to ensure the necessary feeding pressure.
(4) The material outlet end of LS and GX screw conveyors should be provided with 1/2~1 turn of the reverse screw to prevent the powder from clogging the end.
(5) The screw conveyor consists of three parts: the screw body, the inlet and outlet and the drive device.





