Powder Receiving & Feeding
Shanghai Dahe Packaging Machinery Co., Ltd. is one of the leading manufacturers and suppliers of powder receiving & feeding in China. With abundant experience, we warmly welcome you to buy durable powder receiving & feeding for sale here from our factory. Quality products and reasonable price are available.
Overview: The screw feeder is composed of a cover plate, a casing, a screw blade, a material inlet and outlet, a driving device, etc. It is completely free from pollution and does not bring in any foreign matter, which enables fully enclosed automation in the production process and is widely used in metallurgy, building materials, chemicals, food and other industries.
Things to pay attention to when buying an inclined tube screw conveyor:
1. Materials to be conveyed: preferably dry powder materials, the specific gravity should not be too heavy
2. Inclination angle: 0-90°
3. Conveying length: the larger the inclination angle is, the conveying length should not be too long;
4. Motor power: The motor power to be selected is determined according to the conveying length, inclination angle, and conveying amount. Usually, bigger power is required;
5. Spiral rotation speed: The rotation speed of the screw conveyor is selected according to the inclination angle. The larger the inclination angle, the faster the rotation speed.
Safety Precautions for Screw Conveyors
1. The screw conveyor should start without load, that is, start when there is no material in the casing, and then feed the screw machine after starting.
2. During the initial feeding of the screw conveyor, the feeding speed should be gradually increased to reach the rated conveying capacity, and the feeding should be uniform, otherwise it will easily cause the accumulation of the conveyed material and the overload of the drive device, which will damage the entire machine earlier.
3. In order to ensure that the screw machine starts without load, the conveyor should stop feeding before stopping, and stop running after the material in the casing is completely exhausted.
4. The material to be conveyed must not be mixed with hard bulk materials to avoid screw jamming and damage to the screw machine.
5. In use, check the working status of each part of the screw machine frequently, and pay attention to whether the fastening parts are loose. If the parts are found to be loose, the screws should be tightened immediately.
6. Special attention should be paid to whether the screw between the spiral tube and the connecting
shaft is loose. If this phenomenon is found, it should be stopped immediately and corrected.
7. The cover of the screw machine should not be removed when the machine is running to avoid accidents.
8. Any abnormal phenomenon in the operation of the screw machine should be checked and eliminated, and it should not be forced to run.
|
Model |
DH-S2-2K |
DH-S2-3K |
DH-S2-5K |
DH-S2-7K |
DH-S2-8K |
DH-S2-12K |
|
Charging Capacity |
2m3/h |
3m3/h |
5 m3/h |
7 m3/h |
8 m3/h |
12 m3/h |
|
Diameter of pipe |
φ102 |
φ114 |
φ141 |
φ159 |
Φ168 |
Φ219 |
|
Total Weight |
100kg |
130kg |
170kg |
200kg |
220kg |
270kg |
|
Hopper Volume |
100L |
200L |
200L |
200L |
200L |
200L |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Hot Tags: powder receiving & feeding, China powder receiving & feeding manufacturers, suppliers, factory, manual powder filler, , garlic blender machine, best soup makers and blenders, beverage canning line, blender with ice shaver
You Might Also Like
Send Inquiry

























